GS Forklift 1.8ton Diesel Forklift Truck FD18, Chinese TCM tech hydraulic transmission
Engine: Isuzu C240/ Mitsubishi S4S/ Yanmar 4TNE92/Xinchai C490BPG A498, etc
Pneumatic tyres or Solid tyres
Closed cabin, AC, heater for option;
Forks sideshift and forks postioner for option;
Forklift attachment for option: bale clamp, roll clamp, push-pull, four-forks, etc.
| 1 | Model | FD18 | ||
| 2 | Power Type | Diesel | ||
| 3 | Rated Capacity | kg | 1800 | |
| 4 | Load Centre | mm | 500 | |
| Characteristic & Dimension | ||||
| 5 | Fork Size | Lift Height | mm | 3000 |
| 6 | L*W*T | mm | 920*120*35 | |
| 7 | Mast Tilt Angle | F/R | Deg | 6°/12° |
| 8 | Front Overhang | mm | 420 | |
| 9 | Ground Clearance(Bottom of mast) | mm | 110 | |
| 10 | Overall Dimension (without fork) | Length to face of fork | mm | 2295 |
| 11 | Overall Width | mm | 1086 | |
| 12 | Mast Lowered Height | mm | 1995 | |
| 13 | Mast Extended Height(With backrest) | mm | 3940 | |
| 14 | Overhead Guard Height | mm | 2040 | |
| 15 | Turning Radius (outside) | mm | 2055 | |
| 16 | Min.insecting aisle Performance | mm | 2150 | |
| 17 | Speed | Travel (Empty load) | km/h | 15 |
| 18 | Lifting (Full load) | mm | 440 | |
| 19 | Max.Gradeability | mm | 20 | |
| 20 | Tire | Front | 6.50-10-10PR | |
| 21 | Rear | 5.00-8-10PR | ||
| 22 | Wheelbase | mm | 1400 | |
| 23 | Service weight | kg | 3000 | |
| Power & Transmission | ||||
| 24 | Battery | Voltage/Capacity | V/Ah | 12/80 |
| 25 | Engine | Model | C240PKJ-30 | |
| 26 | Manufacture | ISUZU | ||
| 27 | Rated output/r.p.m. | kw | 35.4/2500 | |
| 28 | Rated torque/r.p.m. | N·m | 139/1800 | |
| 29 | No.of Cylinder | 4 | ||
| 30 | Bore*Stroke | mm | 86*102 | |
| 31 | Displacement | cc | 2369 | |
| 32 | Fuel Tank Capacity | L | 45 | |
| 33 | Transmission | Type | Hydraulic | |
| 34 | Stage (FWD/RVS) | 1/1 | ||
| 35 | Operating Pressure for Attachment | Mpa | 14.5 | |
